Toilets are a divisive topic, but today I’ll be setting the record straight once and for all on three important toilet topics. First, the toilet paper roll: overhand or underhand? There’s only one right answer, of course, and it’s overhand. There’s no point in even discussing this one.
Toilet seat: up or down? Wrong question! It’s not about the seat. It’s about the lid. The lid is there for a reason. Put it down. Ladies, you’re guilty of this too. I’ve been in countless female-only homes where I found the lid up at every toilet. I document every one of them in my toilet lid journal.
And now, onto the most divisive topic. Unlike the first two, this one is real, and it actually gets a fair amount of discussion. Should toilets be caulked at the floor? The answer is yes.
Toilets should be caulked at the floor
As standard procedure for every home inspection that I perform, I check the toilets to make sure they’re properly anchored to the floor. Almost every time I find a toilet that’s loose, I also find missing caulk at the base of the toilet. The two go hand-in-hand.
When I find a loose toilet I tell my client to properly secure the toilet to the floor and to caulk around the base of the toilet, but I frequently get clients that tell me they’ve heard otherwise.
The thought process behind not caulking a toilet to the floor is that if the toilet leaks at the floor, you’ll quickly find out about the leak as long as the toilet isn’t caulked. If it is caulked, the thinking is that if the toilet flange leaks, you’ll end up trapping water between the toilet base and the floor in an area that you can’t access.
In reality, toilets rarely leak onto the floor. More often, they leak through the floor around the flange. I’ve found plenty of toilets that leak down into the basement, but very few that leak onto the bathroom floor.
There are two great reasons to caulk a toilet to the floor:
1. Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
2. Caulk helps to keep the toilet secured to the floor. The bolts are really supposed to keep the toilet secure, but caulk helps. As I mentioned before, toilets that are caulked at the floor are rarely loose. Caulk does such a good job of keeping toilets secured to the floor that you could probably rely on caulk alone to keep a toilet secured… not that I would try this.
Besides these two great reasons, it’s also a code requirement. The Minnesota State Plumbing Code says, under section 402.2, “Where a fixture comes in contact with the wall or floor, the joint between the fixture and the wall or floor shall be made watertight.” For areas of the country where the IRC has been adopted, you’ll find nearly identical language under section P2705.1.3: “Where fixtures come in contact with walls and floors, the contact area shall be water tight.”
Some people prefer to caulk all around the toilet and leave about a one-inch gap in the caulk at the back of the toilet to allow water to escape out in the event of a leak. It’s already tough enough to caulk behind a toilet, so if this is what you want to do, God bless. Just don’t go crazy with the caulk.